![background image](http://html1.mh-extra.com/html/valley/center-pivot-7000-series/center-pivot-7000-series_owners-manual_851146051.webp)
Center Pivot 7000, 8000, 8120 Series 51
OPERATION
Towing Option
Towing the 2 Wheel E-Z Tow Pivot (Continued)
17. Align and lower the riser pipe into the anchor
pipe. Be sure the slotted ears on the riser pipe
align with the studs in the pivot pad. In addition,
the slotted ear on the Stop-In-Slot and End Gun
Shutoff bracket must be positioned on the “T”
bracket. See Figure 51-1.
18. Disconnect the tongue from the towing unit.
19. Lift each carrier spring and release the tow link
bar from the tow link carrier. Remove torque pin
from each gearbox steering arm. See Figure
51-2.
20. Position each steering arm in tow link bar yoke,
align holes, then attach each steering arm to tow
link bar with torque pin and secure with lynch
pin. It may be necessary to move the tongue for
proper alignment of the holes. See Figure 51-3.
21. Secure tongue in the raised position.
1
2
4
3
Figure 51-1 1. Riser Pipe
2. Anchor Pipe
3. Slotted Ear
4. Stud
1
2
3
4
5
Figure 51-2 1. Carrier Spring
2. Tow Link
3. Tow Link Carrier
4. Torque Pin
5. Steering Arm
1
2
3
4
Figure 51-3 1. Steering Arm
2. Tow Link Bar Yoke
3. Torque Pin
4. Lynch Pin
Summary of Contents for Center Pivot 7000 Series
