Valley Center Pivot 7000 Series, Owner'S Manual, Page: 58 / 106

58 Center Pivot 7000, 8000, 8120 Series
OPERATION
Towing Option
Towing the 4 Wheel E-Z Tow Pivot - Swivel Tire (Continued)
5. With the service disconnect in the OFF position,
unplug the power plug from the receptacle. See
Figure 58-1.
6. Coil the cord and secure to pivot structure so that
it does not drag on the ground while towing the
pivot.
7. Disconnect the water supply line from lower riser.
8. Prepare the drive units for towing. See Preparing
Drive Unit For Towing in the front of Towing Op-
tion section.
9. Remove the load binders at each corner of the
pivot. See Figure 58-2.
10. If the pivot wheels are in line with the span, move
the tongue to the side of pivot that faces the tow-
ing direction. See Figure 58-3. Then proceed to
step 18 of these instructions.
If the pivot wheels are not in line with the span
continue with step 11 of these instructions.
1
2
3
Figure 58-1 1. Service Disconnect - OFF
2. Power Plug
3. Receptacle
1
Figure 58-2 1. Load Binder
1
2
Figure 58-3 1. Tongue
2. Towing Direction