76 Center Pivot 7000, 8000, 8120 Series
MAINTENANCE
Miscellaneous
2 Wheel E-Z Tow Pivot
Mechanical Stop In Slot Adjustment
The stop in slot shut off location is set by adjusting
the ramp as illustrated in Figure 76-1.
The ramp is placed on the outside of the ring as il-
lustrated in Figure 76-1.
The ramp represents the location where the pivot will
Stop.
The machine will be shut down when the stop in
slot micro switch contacts the stop in slot ramp. The
micro switch should click when the switch rollers are
halfway up or down the respective sloped portion of
the ramp.
NOTE
• Make sure of proper contact between ramps
and switch rollers.
Notice that the control box is located 180 degrees
from the direction the pivot extends from the elbow.
See Figure 76-1.
Therefore, the ramp must be placed 180 degrees
opposite the action point. Figure 76-2 illustrates the
ramp placement to shut the machine down at the
pivot road.
NOTE
• Very small changes in the location of the
stop in slot shut off ramp can result in MUCH
greater distance changes at the outer end of
the machine.
1
1
2
2
3
3
4
Figure 76-1 1. Stop In Slot Ramp (placed on outside of ring)
2. Mounting Ring
3. 3/8 in Hex Nut (for spacer)
4. End Gun and Stop In Slot Control Box
1
2
3
4
Figure 76-2 1. Pivot Road
2. Pivot
3. Stop In Slot Ramp Location
4. End Gun and Stop In Slot Control Box
Summary of Contents for Center Pivot 7000 Series
