Valley-Dynamo Jet-Pong Coin JP100, User Manual

Page: 32 / 80

29 | P a g e
# of Credits for 1 Person to Play: You can enter a number from 1-20 in this field by pressing the field and
entering in your number. If you were to enter 7 then both players would each need to insert 7 coins for a total of
14 coins. If the coins are quarters then this would equate to $1.75/player.
NOTE: If someone wishes to play by
themselves they would simply insert 7 coins and then press the flashing Green pushbutton to get started. If a
second player comes along after Green has started and inserts 7 coins then Red can join in. Both Green and Red
will still only get 10 balls each to throw.
The bill accepter has dip switch settings on it that are set to send 4 credits (pulses) when $1 is inserted.
# of Credits for 1 Person Fri/Sat: If you want to charge more on a busy Friday or Saturday you can enter a
different # of credits for these days. The game uses an internal clock/calendar to monitor the day of the week.
Make sure the
Hour/Day/Month/Year is displaying correctly.
No Activity Reset Time: If there is no activity such as pressing buttons, sensing balls or entering coins the game
will time out and reset after this amount of time.
Troubleshooting Screens: If you need to perform troubleshooting simply press the
“Troubleshooting
Screens”
button.
Return to Main Screen: If you are finished you can simply press
“Return to Main Screen”
to display the game
status. NOTE: To return to
“Configuration”
screen you would need to press
the “
Service
”
button again.
Music & Cheers: Jet-Pong comes preloaded with music and cheers on a MicroSD card mounted on a Blue
Sound Module located on the main processor Carrier board. There are 8 music files and 8 Cheers. These are
.mp3 files. Technically you could load your own 8 songs and 8 cheers but you would have to make sure you own
the music licenses for each.
Bluetooth Audio:
If you don’t want to hear any music or cheers from the game at all you can Bluetooth music to
the game from your computer or phone by moving the audio cable from the blue Sound Module on the PLC
Carrier board to the input of the Bluetooth device mounted to the Audio Amplifier. Then simply synch your phone
in Bluetooth settings to the KN320 device.