Valley-Dynamo Jet-Pong Coin JP100, User Manual

Page: 24 / 80

21 | P a g e
Pushbutton Inspection:
CAUTION: This procedure requires the power to be on and the lid closed during inspection.
The Pushbutton lights and switches on the Control Panel Console can be tested using the Troubleshooting
screen on the HMI Touch Screen. Refer to
Section 9
– Troubleshooting
for details. Open the Ticket Dispenser
door and press the Service Button to make sure the HMI Touch Screen changes accordingly.
Sensor Inspection:
CAUTION: This procedure requires the power to be on and the lid closed during inspection.
The ball sensors under the Triangle Cup Assembly can be tested using the Troubleshooting screen on the HMI
Touch Screen. Refer to
Section 9
– Troubleshooting
for details.
Ticket Dispenser Inspection:
CAUTION: This procedure requires the power to be on and the lid closed during inspection.
The ticket dispenser can be tested using the Troubleshooting screen on the HMI Touch Screen. Refer to Section
9
– Troubleshooting
for details. There is a button on the side of the Ticket Dispenser to manually feed tickets.
Try pressing this button to make sure tickets feed properly.
Coin Mech & Bill Acceptor Inspection:
CAUTION: This procedure requires the power to be on and the lid closed during inspection.
The coin mech and bill acceptor can be tested using the Troubleshooting screen on the HMI Touch Screen. Refer
to
Section 9
– Troubleshooting
for details. Check the Coin Mech light to make sure it is not burned out. Inspect
the mechanical mechanisms on both the Coin Mech and Bill Acceptor for any major wear or jamming issues.
Blower Fan Inspection:
CAUTION: This procedure requires the power to be on and the lid closed during inspection.
The blower fan can be tested using the Troubleshooting screen on the HMI Touch Screen. Refer to Section 9
–
Troubleshooting for details.