Valin AccuTrace, Manual, Page: 59 / 64

Single & Dual Zone Heat Trace Control Panel | Valin Corporation
COMMUNICATIONS
FIGURE 5-8 CIRCUIT 2 INTEGER VALUES
Parameter Name Description Range Modbus Address Data Type Access
Circuit 2 Temperature SP Temperature setpoint of Circuit 2 0-720˚F 400201 Unit Read Only
Circuit 2 Mode View control mode of Circuit 2 0-3 400202 Unit Read Only
Circuit 2 Man Mode Power Power output (%) for Circuit 2 0-100% 400203 Unit Read Only
Circuit 2 On/Off Mode DB+ Circuit 2 Deadband high
range temperature
0-100°F 400204 Unit Read Only
Circuit 2 On/Off Mode DB- Circuit 2 Deadband low
range temperature
0-100°F 400205 Unit Read Only
Circuit 2 High Current Alarm SP Set point for High
Current Alarm Circuit 2
1-40 and > than
low alarm
400206 Unit Read Only
Circuit 2 Low Current Alarm SP Set point for Low
Current Alarm Circuit 2
1-40 and < than
high alarm
400207 Unit Read Only
Circuit 2 High Temp Alarm SP Set point for High Temp
Alarm Circuit 2
0-720 and >
than low alarm
400208 Unit Read Only
Circuit 2 Low Temp Alarm SP Set point for Low Temp
Alarm Circuit 2
0-720 and < than
high alarm
400209 Unit Read Only
Circuit 2 GFEP SP Set point for High GFEP
Alarm Circuit 2
20-80mA 400210 Unit Read Only
Circuit 2 High Current
Alarm Time Delay
Set time delay for Circuit
2 High Current Alarm
500-60000msec 400211 Unit Read Only
Circuit 2 Low Current
Alarm Time Delay
Set time delay for Circuit
2 Low Current Alarm
500-60000msec 400212 Unit Read Only
Circuit 2 High Tempera-
ture Alarm Time Delay
Set time delay for
Circuit 1 High Temp Alarm
500-60000msec 400213 Unit Read Only
Circuit 2 Low Tempera-
ture Alarm Time Delay
Set time delay for
Circuit 2 Low Temp Alarm
500-60000msec 400214 Unit Read Only
Circuit 2 GFEP Alarm Time Delay Set time delay for
Circuit 2 High GFEP Alarm
500-60000msec 400215 Unit Read Only
Circuit 2 GFEP Auto
Test Cycle Time
Set the Cycle Time for GFEP
Auto Test on Circuit 2
400216 Unit Read Only
Circuit 2 Proportional Gain Enter value for
Proportional Gain (Kp) Circuit 2
1-1000 400217 Unit Read Only
Circuit 2 Integral Factor Enter value for
Integration Factor (Ti) Circuit2
0-100 400218 Unit Read Only
Circuit 2 Derivative Factor Enter value for
Derivation Factor (Td) Circuit 1
0-50 400219 Unit Read Only
59