Single & Dual Zone Heat Trace Control Panel | Valin Corporation
SET UP
FIG. 4-20 GFEP TEST SCREEN DESCRIPTION
A self-test will be performed periodically based on the cycle time setpoint. The system will apply a test current
to the GFEP detection circuit and compare the measured result with the expected result. If the test fails an
alarm will be generated. This alarm will not affect the load output and is for information only.
1. Test GFEP-
Performs an immediate GFEP test upon button press.
2. GFEP Status-
Displays the result of the auto or immediate GFEP test.
3. GFEP Auto Test Cycle Time-
Set the time interval that the Auto GFEP Test will occur. Range 10-60 minutes.
4. Back-
Return to
Main Menu.
5. Home-
Return to
Home Screen.
45