Single & Dual Zone Heat Trace Control Panel | Valin Corporation
INSTALLATION
Hardware
The pair of brackets that come with the AccuTrace™ panel are designed to provide the necessary airflow to the
heat sink on the back of the enclosure. Ensure that airflow is not blocked or restricted in any way. Maintain at
least 12” of clearance above and below the AccuTrace™. Refer to
Figure 2-5
below.
The heat sink must be inspected every season to confirm that no debris or objects are in contact with the heat
sink. To dislodge debris, use high pressure blasts of clean air that will not damage the fins.
10
FIG. 2-5 ACCUTRACE™ CLEARANCES