Single & Dual Zone Heat Trace Control Panel | Valin Corporation
SET UP
1. Modes
- Select control mode per circuit and temperature settings, enable or disable circuits, and toggle soft
start feature.
2. Alarm Settings
- Displays
Alarm Settings Menu
where the user may enable or disable alarms, establish
alarm setpoints, alarm event outputs, and delay times.
3. System Voltage
- Displays the
System Voltage Menu
where the user sets the nominal system voltage for
use in GFEP testing.
4. PID Settings
- Displays the
PID Settings Menu
, here the user may adjust PID parameters for use with the
Auto PID control mode.
5. Ethernet Port Settings
- Displays the
Ethernet Parameters Menu
. The user may enter network information
for ethernet communications here. See the Communications section for navigation and screen information.
6. Serial Port Settings
- Displays the
Serial Com Port Menu
. The user may enter network information for
Modbus communications here. See the Communications section for navigation and screen information.
7. Home
- Return to
Home Screen.
8. Back
- Return to
Main Menu
.
FIG. 4-4 SYSTEM SETTINGS DESCRIPTION
28