Single & Dual Zone Heat Trace Control Panel | Valin Corporation
OPERATION
On the
Home Screen
, a logged in user may set and view process values for circuit 1 & 2. Circuit activity may also
be toggled between Enabled and Disabled.
1. Process Input
- View the process temperature of circuit 1 or 2. This value is displayed in degrees Fahrenheit
(˚F).
2. Temperature Setpoint
- Establish the temperature setpoint or circuit 1 or 2. This value is displayed in
degrees Fahrenheit (˚F).
3. Heat Trace Load
- View the load of circuit 1 or 2. This value is displayed in amperes (A).
4. Circuit Enable/Disable
- Toggle the active state of circuit 1 or 2. This may also be changed in the Mode
Menu.
5. Log In/Log Out -
Displays the
Log in Screen
to enter credentials. Logging out will require credential re-entry.
6. Menu -
Displays the
Main Menu
with access to submenus
System Settings
,
GFEP Test
, and
Admin
7. Active Alarms
- Displays the
Active Alarms Screen
where the user may view and reset active alarms.
8. Actual Power
- Displays the power output for circuit 1 or 2. If
Manual Mode
is selected for control, this will
display the user set power output. If on/off mode is selected, this display is not visible.
9. Current Mode
- Displays the control mode selected in the
Modes Menu
for circuit 1 or 2.
THE HOME SCREEN
FIG. 3-8 HOME SCREEN DESCRIPTION
24