BUS TOP K / SOLAR / C
42
4 Troubleshooting
4.1
General
4.1.1 Bus Top K / Solar,
electrical
If the hatch fails to operate in a
travel bus when in open position,
it may be operated with a screw-
driver after removing the inside
cover panelling of the actuator.
If the hatch fails to operate in a
public transport bus when in
open position, it may be operated
with a screwdriver after removing
the round, red panel (if fitted) of
the inside cover panelling of the
actuator.
Should the red panel or an opening
not exist, drill a hole with a diameter
of 10 mm into the inside cover
panelling as illustrated in the figure
below.
4.1.2 Bus Top Solar (Fan)
After failure of the fans it is recom-
mended to replace the cover
assembly. Repairs may only be
performed by the manufacturer.
4.1.3 Bus Top C
If the hatch fails to operate in a
public transport bus in the open
position, it may be operated after
removal of the bus roof fairing
(in the hatch area) via the worm
drive shaft using an 8 mm spanner
wrench through a slot in the cover
inside half panelling and for dates of
manufacture 09/99 and up using a
7 mm socket wrench. The variant
with cover inside full panelling first
requires its removal. Then the
procedure is identical with that for
the variant with cover inside half
panelling.
100mm
100mm
Ø10m
m
Ø10m
m
F
ahr
tr
ic
ht
ung
100mm
100mm
Kap_gb_neu.fm Seite 42 Donnerstag, Januar 25, 2001 9:09 AM
Summary of Contents for BUS TOP C
Page 106: ...memos...
