DuoPrint Series
Maintenance and Cleaning
10.15 Operating
Manual
69
9 Maintenance
and
Cleaning
DANGER!
Risk of death by electric shock!
Disconnect the label printer from power supply
before performing any maintenance work.
NOTICE!
When cleaning the label printer, personal protective equipment
such as safety goggles and gloves are recommended.
Maintenance task
Frequency
General cleaning (see section
9.1, page 70).
As necessary.
Cleaning printer roller (see
section 9.2, page 70).
Each time the label roll is
changed or when the printout and
label transport are adversely
affected.
Cleaning printhead (see section
9.3, page 71).
Each time the transfer ribbon is
changed or when the printout is
adversely affected.
Cleaning label photocell (see
section 9.4, page 72).
When exchanging the label roll.
Replacing printhead (see
section 9.5, page 73).
In case of errors in printout.
NOTICE!
The handling instructions for the use of Isopropanol (IPA) must
be observed. In the case of skin or eye contact, immediately
wash off the fluid thoroughly with running water. If the irritation
persists, consult a doctor. Ensure good ventilation.
WARNING!
Risk of fire by easily inflammable label soluble!
When using label soluble, dust must be completely
removed from the label printer and cleaned.
Maintenance
schedule