DuoPrint Series
Maintenance and Cleaning
10.15 Operating
Manual
73
9.5 Replacing the Printhead
CAUTION!
The printhead can be damaged by static electricity discharges
and impacts!
Set up the device on a grounded, conductive surface.
Ground your body, e.g. by wearing a grounded wristband.
Do not touch contacts on the plug connections.
Do not touch the printhead with hard objects or your
hands.
Figure 14
1. Open the printer cover.
2. Remove labels and transfer ribbon from the label printer.
3. When printhead is closed, loosen the fixing screws (G).
4. Remove the label guiding between the printheads.
5. Turn red lever (E) anticlockwise to lift up the printhead.
6. If the printhead (5) is not disengaged on the pressure roller (J),
continue loosen the fixing screws (G).
7. Remove the printhead carefully to the front until you can reach the
plug connections.
8. Remove plug connections and then remove printhead.
Removing the
printhead
