Maintenance and Cleaning
DuoPrint Series
74 Operating
Manual
10.15
Figure 15
1. Attach plug connections.
2. Position printhead in printhead mounting bracket in such a way
that the pins are secured in the corresponding holes in the head
plate.
3. Lightly keep printhead mounting bracket on the printer roller with
one finger and check for correct positioning of the printhead.
4. Screw in fixing screws (G) and tighten it.
5. Install again the label guiding.
6. Reload labels and transfer ribbon (see chapter 6 Loading Media,
page 33).
7. Check resistance value on the type plate of printhead and if
necessary change the value in the menu
Service functions/Heater
resistance
.
Installing the printhead
