DuoPrint Series
Loading Media
10.15 Operating
Manual
33
6 Loading
Media
6.1 Loading Label Roll
Figure 8
1. Open the printer cover.
2. Open printheads (A) by turning the red pressure levers (B)
anticlockwise.
3. Remove the optional outside label mounting plate from the
unwinder.
4. Load the label roll with inner winding onto the unwinding roll.
5. Attach again the label mounting plate.
6. Lead the label material below the return pulley (D) and the
printheads (A).
Pay attention that the label runs through the photocells (F).
7. In order to move the printheads (A) down, turn the red pressure
levers (B) in clockwise direction until they lock.
8. In front of the first printhead you can see the tear off edge (G)
from which you can rip off labels to the bottom.
9. Enter the offset value in the menu
Print settings/Tear-off
.
10. Adjust the adjusting ring (E) onto the return pulley (D) and the
label guiding (C) to the width of material.
11. Close the printer cover.
Loading label roll
in tear-off mode
