26
947180
2. Enter the number of the input zone (i.e., the zone containing the doorbell pushbutton).
Use ALIAS numbers, if optioned. Otherwise, use Physical zone/group numbers.
Hear a DOUBLE beep.
3. Enter the tone option,
0
through
7
.
0
None
1
Chime
2
Siren
3
Warble Siren
4
Night Bell
5
Fast Ring
6
Steady Tone
7
Door Bell
Hear TRIPLE beeps.
4. To verify the tone option for a given input zone, dial
9 3
and repeat steps 2 and 3 above.
9 4 SET TONE ROUTING
Whatever zones are selected here will receive the tone selected in the previous option, Tone Selection.
For example, you have optioned an input zone to receive a doorbell pushbutton input. And you have
selected a tone (in the previous step) to be output when the doorbell input is received. Now you must
select the output zone or zone group which will receive the tone.
1. Dial
9 4
to activate Tone Routing.
Hear a DOUBLE beep.
2. Enter the input zone number.
Hear a DOUBLE beep.
3. Enter the output zone/group ALIAS number.
Hear TRIPLE beeps.
4. To verify Tone Routing, dial
9 5
and repeat steps 2 and 3 above.
Note:
Use ALIAS numbers, if optioned. Otherwise, use physical zone/group numbers.
9 6 AUDIO SOURCE ENABLE
The primary use for this feature is to allow the paging system to be used for door service. If optioned,
whenever a selected zone is active (i.e., the doorbell pushbutton), an audio source (either Telephone
Access or Attendant Access) will be routed automatically to a zone (the door speakerphone) selected in
Audio Routing, below. The default for this option is NONE.
1. Dial
9 6
to select Audio Source Enable.
Hear a DOUBLE beep.
2. Enter the input zone or group number.
Hear a DOUBLE beep.
Note:
Use ALIAS numbers, if optioned. Otherwise, use physical zone/group numbers.
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
