20
947180
Digit string length for an ALIAS code can be 3 or 4 digits, but all ALIAS codes must have the same num-
ber of digits. (Refer to Step 3) The
∗
and
#
digits are not applicable digits for zone ALIAS numbers.
Note:
If ALIAS numbers are enabled, you MUST use them for programming from now on. When an
ALIAS number for a zone is changed, all the previous zone options for that zone will be transferred to the
new zone number.
Refer to your own Zone Map and the Example Zone Map at the end of this programming section.
1. Dial
6 0
to select this option.
Hear a DOUBLE beep.
2. Enter the 2-digit PHYSICAL zone/group code, of the zone to be given an ALIAS number.
Hear a DOUBLE beep.
3. Enter the ALIAS zone/group number you have chosen.
Hear TRIPLE beeps.
4. To verify the assignment of an ALIAS to a selected zone or group, dial
6 1
and repeat steps 2 and 3
above.
6 2 TYPE OF ZONE: INPUT OR OUTPUT
The choices here are INPUT #1, INPUT #2, and OUTPUT. Be sure the manually selectable Zone Option
switch on the rear of the Controller or Zone Expansion Unit is set to match the type of zone selected
(input or output). Input #1 would be used for an emergency alert, say a connection to your alarm system.
Input #2 would be a lower priority, say a doorbell input.
Note:
The INPUT #1 option must only be assigned to physical zones 1 through 8 (on the Controller).
The factory default is OUTPUT (i.e., all zones are output type, by default).
1. Dial
6 2
to select this option.
Hear a DOUBLE beep.
2. Enter the number of the zone or zone group to be optioned. Use ALIAS numbers, if optioned.
Otherwise, use Physical zone/group numbers.
Hear a DOUBLE beep.
3. Press
0
to designate the zone as OUTPUT
Press
1
to designate it as INPUT #1, or
Press
2
to designate it as INPUT #2.
Hear TRIPLE beeps.
4. To verify the zone type assignment, dial 6 3 and repeat steps 2 and 3 above.
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
