21
947180
SET INPUT PRIORITY ARRANGEMENT
The input priorities are pre-set at the factory. You may only assign a priority level to inputs such as door-
bell or security alarm, by assigning them to Input #1 or Input #2, which differ in priority.
Note:
These priorities cannot be rearranged. Also, if you select more than one zone to be inputs of the
same level (Input 1, for example), such inputs will be handled on a first in, first served basis. See Type of
Zone option, under Zone/Group Configurations programming, later in this section.
The default setting is:
1 – Attendant Access
2 – Input #1
3 – Telephone Access
4 – Input #2
5 – Night Bell
Music (always lowest priority).
6 4 SET ZONE GROUPING TO PAGE
This option allows you to select a group of zones to be paged at the same time. The number of zone
groups that can be formulated is eight; the maximum number of zones per group is 56 zones.
The factory default is NONE (there are no default zone groups).
You will need to repeat this procedure for each zone group you wish to set up.
1. Dial 6 4 to select this option.
Hear a DOUBLE beep.
2. Enter the zone code, of the zone group to be defined (81 thru 88).
Hear a DOUBLE beep.
For example, dial 81 for zone group 81 (Zone group 80 is always All Call). Use ALIAS numbers, if
optioned. Otherwise, use Physical zone/group numbers.
For example, 01 (tone), 02 (tone), 13 (tone), 14 (tone), #, indicates zones 1, 2, 13, and 14 are included in
this group. Enter the codes consecutively, with no digit or character between them. Use ALIAS numbers,
if optioned. Otherwise, use Physical zone/group numbers.
3. Enter zone codes of each zone to be included in the group.
Hear a Confirmation Tone for each zone, then dial tone.
4. Press # to end the string of zones.
Hear TRIPLE beeps.
5. To verify the zone group assignment, dial
6 5
and repeat steps 2 and 3 above.
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
