Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 67
CAUTION
The WLAN interface is designed to be used in trusted network
environments (trusted corporate LAN or VPN-based connection over
internet). Avoid connecting the transmitter directly to a public network
because the device can be attacked by a malicious user through the
network.
0802-103
Figure 45
WLAN Interface Module
The numbers refer to Figure 45 above:
1
=
Flat cable connector
2
=
Connector for antenna cable (connected to transmitter cover)
Attaching the WLAN Antenna
The LAN interface module must be installed at the factory (when
ordering the transmitter), or by a Vaisala Service Center. Before taking
the transmitter into use, you must attach the antenna of the WLAN
interface into the RP-SMA connector on the transmitter cover. The
location of the antenna is shown in Figure 92 on page 177.