Vaisala CT25K User Manual Download Page 10

Page: 10 / 86

For information concerning the use of data collectors, sensors, or other installed
hardware, see the appropriate device manuals.

1.3 Documentation Conventions

Warning

alerts you to a serious hazard. If you do not read and follow

instructions carefully at this point, there is a risk of injury or even death.

WARNING!

Caution

warns you of a potential hazard. If you do not read and follow

instructions carefully at this point, the product could be damaged or important data
could be lost.

CAUTION!

Note

highlights important information on using the product.

Tip

gives information for using the product more efficiently.

Lists tools needed to perform the task.

Indicates that you need to take some notes during the task.

1.4 Trademarks

AviMet

is a registered trademark of Vaisala Oyj.

Microsoft

, Windows

, and Internet Explorer

are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.
All other product or company names that may be mentioned in this publication are trade
names, trademarks, or registered trademarks of their respective owners.

Low-Level Windshear Alert System User Guide

M210885EN-K

Summary of Contents for CT25K























































































Search results

Summary of Contents for CT25K

Reviews:

Related manuals for CT25K

Brands by name

Popular brands

Vaisala CT25K, User Manual

Search results

Summary of Contents for CT25K

Reviews:

Related manuals for CT25K

Brands by name

Popular brands