Vaisala CT25K User Manual Download Page 70

Page: 70 / 86

Column

Description

Location

Location of the sensor, for example, runway

10L

Status

Status of the sensor:

•

Online

: Sensor is working normally and its data is used in the system.

•

Unavailable

: Sensor is offline/unavailable and its data is not used in the

system.

•

Faulty

: Sensor is enabled and used in the system but it is not working properly.

You should disable the sensor and use alternative sources for data.

•

Degraded

: Sensor data is degraded but used in the system. You should

investigate the situation, disable the sensor and use alternative sources for data.

8.3 Operating Sensor Selector

8.3.1 Disabling Data Use

If a sensor is faulty, or being maintained, you can disable the sensor by doing the following:

1. Move the mouse pointer over the row for the sensor that you want to disable.

2. Deselect the

Enabled

checkbox.

This will change its status to

Offline

and the data from it will not be published for other

system processes.

8.3.2 Enabling Data Use

1. Move the mouse pointer over the row for the sensor that you want to enable.

2. Select the

Enabled

checkbox.

This will change its status to

Online

and the data from it will be published for other system

processes.

Low-Level Windshear Alert System User Guide

M210885EN-K

Summary of Contents for CT25K























































































Search results

Summary of Contents for CT25K

Reviews:

Related manuals for CT25K

Brands by name

Popular brands

Vaisala CT25K, User Manual

Search results

Summary of Contents for CT25K

Reviews:

Related manuals for CT25K

Brands by name

Popular brands