Vaisala AQT530, Configuration Manual

Page: 21 / 64

4. In PuTTY, select Serial or Serial & USB .
The screen may look different, depending on the computer and Windows operating
system version.
5. In PuTTY Configuration , select the COM port where you connected ATEN USB to Serial
Bridge.
Use the following COM port settings.
Parameter Value
Speed (baud) 115200
Data bits
8
Stop bits 1
Parity None
Flow control
None
These settings are applied on your computer so that it can connect to AQT530.
6. Select Open .
Connection to AQT530 is now open and you can proceed to read and set parameters.
To start, press
ENTER or type command motd .
More information
‣
CLI command reference (page 28)
Chapter 4 – CLI operation
19