Vaisala AQT530, Configuration Manual, Page: 34 / 64

lpc --info
Example response 1:
Serial: B3245009
SW ver: 3.0.243.ad102e1
$
Example response 2 (no LPC connected):
No LPC option installed!
$
5.6 Printing measurements and changing
measurement output unit (
meas
command)
To display the measurements with specific units, use the meas command.
meas [--metric|--ppb|--nolc]
Table 21 Parameters for
meas
command
Parameter Value Mandatory Description
(none) − No Prints out all measurements with gases in parts per
million (ppm) units and with linear correction.
--metric
Fixed No
Prints out all measurements with gases in metric (µg/m
3
)
units and with linear correction.
--ppb
Fixed No Prints out all measurements with gases in parts per billion
(ppb) units and with linear correction.
--nolc
Fixed No Prints out all measurements, without linear correction and
with gases in parts per million (ppm).
meas
Example response:
AQT530 Configuration Guide M212572EN-C
32