Vaisala AQT530, Configuration Manual, Page: 15 / 64

Action CLI command and
parameter
CLI reference Modbus register
addresses
Change temperature unit
(°C/°F)
set tempunit
Changing temperature
unit (page 24)
0x001C
Adjust linear correction
set
• co_zero
• co_span
• no_zero
•
no_span
•
no2_zero
• no2_span
• so2_zero
• so2_span
• h2s_zero
• h2s_span
• o3_zero
•
o3_span
•
pm1_zero
• pm1_span
• pm25_zero
• pm25_span
• pm10_zero
• pm10_span
Adjusting linear
correction (page 25)
0x0086 ... 0x0097
Set system time
date
Setting date ( date
command) (page 30) 0x0057 ... 0x005C
See
Setting up system
time over Modbus
interface (page 52)
AQT530, base module,
LPC, and HMP
identification (read-only)
show
• serial
• sw_ver
• hw_ver
• model
• unit
• cal_date
•
base_serial
•
lpc_serial
• hmp_serial
• hmp_version
lpc --info
Printing LPC information
( lpc command)
(page 31)
Modbus device
identification:
• Model
• SW version
• Sensor model
• Serial number
• Calibration date
• Hardware version
Modbus registers:
• Calibration date:
0x0013-0x0015
• Base firmware version:
0x004F-0x0053
• HMP firmware version:
0x0054-0x0056
• AQT serial number:
0x00B4-0x00B7
• HMP serial number:
0x00B8-0x00BB
• LPC serial number:
0x00BC-0x00BF
• LPC firmware version:
0x00F4-0x00F8
Chapter 3 – Configuration
13