manualshive.com logo in svg

Vahle VCL Series, Translation Of The Original Operating Instructions, Page: 73 / 96

Share
Download
Vahle VCL Series Translation Of The Original Operating Instructions Download Page 73

 

COMMISSIONING

71

 

CAUTION!

When the VMT is hanging, i.e. the opening is facing downwards, the following restric-
tions apply:

►

Hanging spacing: max. 3 meters

►

The VMT hangers are installed in staggered arrangement. This means that the
clamping springs are arranged alternately on the left or right

►

In the case of hanging spaces of less than 2 meters, the alternate fixing of the
hangers is not required.

NOTICE!

►

Please observe the following torques regarding the different hangers:

►

The AV-VMT-BS hangers are fixated with drill screws

NOTICE!

Observe the following installation distances

►

Hanging spacing: max. 3.5 meters

►

The first and last hanger have to be max. 500 mm from the end of the VMT.

►

The distance of the hangers to the connecting material must be min. 350 mm.

►

The hangers must be mounted parallel and at right angles to the guide rail.

Summary of Contents for VCL Series

































































































Reviews:

No comments