Vahle VCL Series Page 15 Translation Of The Original Operating Instructions Download

Page: 15 / 96

SAFETY INSTRUCTIONS

2.9

Signage

The following symbols and instruction signs are located in the work area. They relate to the immediate envi-
ronment in which they are installed.

DANGER!

Danger of life due to electrical current!

Contact with live parts can result in life-threating injuries.

►

Make sure that the components are not live or in tension unauthorized approxima-
tion.

WARNING!

Danger from illegible signs!

Over time, labels and signs can get dirty or can become unreadable in other ways,
which means that the dangers are not identified and that operating instructions can-
not be followed.

►

Always keep all safety, warning and operating instructions in a legible condition.

NOTICE!

Follow instructions!

Only use the designated product after this documentation has been completely read
and understood.

Summary of Contents for VCL Series

































































































Search results

Summary of Contents for VCL Series

Reviews:

Related manuals for VCL Series

Brands by name

Popular brands

Vahle VCL Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for VCL Series

Reviews:

Related manuals for VCL Series

Brands by name

Popular brands