Vahle VCL Series, Translation Of The Original Operating Instructions, Page: 52 / 96

COMMISSIONING 50
End segment with fixpoint
Conductor system
* only applies if the connecting cap can be supported. For exposed connectors adhere to the spacing of 150
mm.
End segment without fixpoint
Assembly instructions
Requirements:
 Clean and tidy workplace.
Required tools:
⚒
Drill bit according to table below (4.6 mm - 4.9 mm)
Assembly instructions:
1. Determine position for the bore hole using the drilling template and fix in place.
2. Drill hole with "X" mm dia.
Diameter "X'" of the
mounting bore holes [mm] Plate thickness [mm]
(Position 2)
4.6 3
4.7 4
4.8 5
4.9 6