To assign a static IP address:
Work with the IT staff to determine the appropriate IP address, subnet mask, and gateway information.
The procedure for assigning a hostname is the same on both cameras:
1. Go to the Networking page of the web interface.
2. Under Network Interfaces, set the IP address to Static.
3. Enter the new IP address, subnet mask, and gateway.
4. Save the changes.
This will end your session. Log in again to continue configuring the system.
Configuring the Video Camera
You will need to configure the video camera as well as the IR camera. Configuration options vary
somewhat, depending on the camera. Refer to the video camera's manual for configuration tasks. All
manuals are available at
. They are also available on the product pages of the Vaddio
website.
Key tasks:
n
Define position presets
n
Enable IP streaming, if available
Video camera presets typically provide a tighter shot at a specific location – for example the presenter at
the lectern, a close-up of a demonstration, or a wider static shot of the presentation area for multiple
presenters.
Other common configuration tasks:
n
Save custom color settings (CCU scenes)
n
Define the room label information
n
Set the time zone
You can access the video camera's web interface from the IR camera's Pairing page, using the Device
Web Page link.
23
Integrator's Complete Guide to the RoboTRAK Presenter Tracking System
