Accessing the Video Camera's Web Interface
You can use the same computer or mobile device that you use to access the IR camera's web interface.
Note
If you know the video camera's hostname, you can use it in place of the IP address to access the camera's
web interface.
To access the video camera's web interface before it is paired to the IR camera:
1. Ensure that the camera's video output is visible on the display.
2. Press and hold the Data Screen button on the remote. After 3 seconds, the room display presents the
information.
3. Open a new browser tab or window and enter
http://
followed by the video camera's IP address in
the address bar (for example,
http://10.30.200.74
) to open its web interface. The guest view of
the Camera Controls page opens.
Note
The camera's web interface may differ from the illustration here.
4. Select Admin, and log in. The default password is
password
.
To access the video camera's web interface after it is paired to the IR camera:
On the Pairing page, follow the Device Web Page link.
21
Integrator's Complete Guide to the RoboTRAK Presenter Tracking System
