The Quick-Connect SR Interface
This interface provides basic connectivity to older equipment.
Back panel features:
n
24 VDC 2.0 A power connector
– Connect only the power supply shipped with the Quick-Connect.
n
EZ-Camera Power & HD Video
– Power to the camera and video from the camera. On some units,
this port is color-coded orange.
n
HD Video Output YPbPr
– Analog component video output from the camera. SD video resolutions
(Y/C and CVBS formats) are not supported by the Quick-Connect SR Interface; however, analog
component SD (high fps format - 480p/59.94 and 576p/50) video is supported.
n
IR Output
– Forwards IR signals from the camera to third party equipment such as videoconferencing
codecs. Use the MOD signal if the IR is from a remote or other IR emitter; use the NON-MOD signal for
wired connections.
n
RS-232 Input
and
RS-232 Out to Camera
– Route RS-232 control through the Quick-Connect device
for ease of cabling. Connect RS-232 Input to an optional camera controller, and connect RS-232 Out to
Camera to (you guessed it) the camera.
22
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
