Indoor/Outdoor Dome Camera ADC-VC825
|
Setup Guide
INDOOR/OUTDOOR DOME CAMERA
SETUP GUIDE
INTRODUCTION
The ADC-VC825 from Alarm.com is a high-performance
fixed dome camera optimized for indoor and outdoor video
monitoring. Its discreet, compact design and outstanding
HD quality video make the camera ideal for both
commercial and residential video installations. The camera
features a vandal-resistant exterior casing with an IP66
rating and Power over Ethernet (PoE) capabilities.
PRE-SETUP CHECKLIST
•
ADC-VC825 camera (included)
•
AC power adapter (required for non-PoE connections)
•
Broadband (Cable, DSL or Fiber Optic)
•
Internet connection with router
•
A computer or mobile device with Internet access
•
An Ethernet / Cat5 cable
•
Login and Password for the Alarm.com account to which you will add the camera
ADD THE CAMERA TO AN ALARM.COM ACCOUNT
Complete these steps prior to installing the camera in its final location:
1.
Connect the camera to the router via an Ethernet cable.
2.
If the Ethernet connection does not provide power, connect the camera to an AC power adapter and plug
the adapter into a non-switched outlet.
3.
Wait 2 minutes for the camera to connect to the Internet.
4.
Add the device by either selecting the account in MobileTech OR by using a web browser and entering the
following URL: www.alarm.com/addcamera
5.
Select the camera from the video list or type in its MAC address to begin adding the camera. The camera’s
MAC address is located on the base of the camera.
6.
Follow the on-screen instructions to finish adding the camera. You may configure camera settings from the
Customer Website.
You can now power down the camera and install it in its final location using the included hardware.
