To configure IP streaming (Quick-Connect USB only):
1. Select the desired video resolution. This cannot be higher than the video resolution set on the camera.
Video resolution determines the size of the media player window displaying the stream on people's
computers.
2. Select the video quality. This determines how much bandwidth the stream uses.
Pro tip
A higher bandwidth setting provides better video if the network can support it, but can result in poor-
quality video if the network has bandwidth limitations. A high video resolution setting combined with a
high quality (bandwidth) setting requires the most network bandwidth. If the network cannot easily
support this, video errors will be more likely and more obvious than at lower quality and/or resolution
settings.
3. Select the streaming protocol if necessary. RTSP on port 554 is the default; the port number can be
changed.
Do not change the port number unless your IT staff directs you to do so.
HLS is available for
streaming to Apple iOS devices. HLS streaming is always on port 80.
4. Optional: Change the streaming URL path to help people identify the URL in their media player's list of
recent streams.
5. Save the changes you make on this page.
68
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
