VADDIO AV BRIDGE MATRIX PRO Installation And User Manual Download Page 54

Page: 54 / 68

AV Bridge MATRIX PRO

AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C

Page 54 of 68

RS-232 Serial Control

The AV Bridge MATRIX PRO has three (3) discrete camera control ports which eliminates the need for daisy-

chaining control cabling. With MATRIX PRO, all cabling configurations are home run wiring configurations. Each

channel will auto-configure the input channel for control of the camera attached.

Vaddio uses simple control protocols to accomplish custom programming with the RS-232 Input of the AV Bridge

MATRIX PRO.

Communication Specification

Communication speed (baud rate): 38400 bps

Start bit: 1

Stop bit: 1

Data bits: 8

Parity: None

No Flow control

Control Port - RS-232 on DE-9F Connector
PIN#

Signal

TXD

RXD

GND

All other pins - Unused

The DE-9F Connector may require a null modem to reverse Tx and Rx, depending on the application.

Command List

Many of these have subcommands. For clarity, subcommands are described individually – for example, camera

focus is described separately from camera home.

Camera commands

The base command camera is used to access camera control functionality. Used in conjunction with control
arguments including home, pan, tilt, zoom, preset etc. The camera number

must

be specified.

This section covers the camera subcommands:

home

focus

pan

tilt

zoom

preset

ccu get

ccu set

ccu scene

standby

Camera home

Moves the specified camera to the home position.

Synopsis

camera [1-3] home

Required

1 - 3

Specify which camera to return to the home position.

Example

camera 1 home

Moves camera 1 back to the home position.

Summary of Contents for AV BRIDGE MATRIX PRO





































































Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands

VADDIO AV BRIDGE MATRIX PRO, Installation And User Manual

Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands