VADDIO AV BRIDGE MATRIX PRO Installation And User Manual Download Page 12

Page: 12 / 68

AV Bridge MATRIX PRO

AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C

Page 12 of 68

Connect any external trigger and/or control devices.

RS-232 DE-9 female jack for external control

from 3

party systems such as Crestron or AMX.

Trigger inputs are contact-closure style (shunt to

Ground), as provided by Vaddio StepVIEW™

Mats or AutoVIEW IR™ Sensors, PresenterPOD™

System, 5-Wire microphones or any other dry

closure devices from GPIO ports of control systems

or even a simple switch.

Connect USB 2.0 computer if desired. If applicable, connect IP 10/100BaseT Network Port to either

network, switch or computer as needed.

Once you have connected all of your inputs, outputs and the Vaddio provided power supply, connect the

power cable to the power supply and plug into an AC outlet. The MATRIX PRO will boot up and scan

for cameras. As the MATRIX PRO boots up, it will automatically scan each camera control port

sequentially to confirm which ports have compatible PTZ cameras connected.

Power Supply

24VDC

3.75 Amp

Use only the power supply provided with the system. Use of any unauthorized power
supply will void any and all warranties.

Summary of Contents for AV BRIDGE MATRIX PRO





































































Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands

VADDIO AV BRIDGE MATRIX PRO, Installation And User Manual

Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands