VADDIO AV BRIDGE MATRIX PRO Installation And User Manual Download Page 57

Page: 57 / 68

AV Bridge MATRIX PRO

AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C

Page 57 of 68

Camera ccu set

Set CCU values for the specified camera. At the risk of stating the obvious, all options require option parameters.

Synopsis

camera [1-3] ccu set {auto_white_balance {on | off} I red_gain [0-255] | blue_gain [0-255]

|backlight_compensation | auto_iris | iris | gain | detail | chroma}

Required

[1 – 3]

Specify which camera’s values to set.

Options

auto_white_balance [on

| off]

Set auto white balance mode on or off.

red_gain [0 – 255]

Set the red gain value to an integer between 0 and 255.

blue_gain [0 – 255]

Set the blue gain value to an integer between 0 and 255.

backlight_compensation

[on | off]

Use backlight compensation or turn it off.

auto_iris [on | off]

Set auto-iris mode on or off. If auto-iris is on, it overrides any

manual iris setting. The manual iris value will persist and be

recalled when setting is changed back to manual.

iris [0 – 13]

Set the iris value to an integer between 0 and 13. This will

over-ride any auto-iris setting

gain [0 – 13]

Set gain to an integer between 0 and 13.

detail [0 – 15]

Set detail value to an integer between 0 and 15.

chroma [0 – 14]

Set chroma value to an integer between 0 and 14.

Examples

camera 1 ccu set auto_iris off

Sets the camera 1 auto_iris off

camera 2 ccu set red_gain 10

Sets the camera 2 red gain to be 10

Camera ccu get

Retrieve current CCU values for the specified camera.

Synopsis

camera [1-3] ccu get {auto_white_balance I red_gain | blue_gain |

backlight_compensation | auto_iris | iris | gain | detail | chroma}

Required

[1 – 3]

Specify which camera’s values to get

Options

auto_white_balance

Gets auto white balance mode

red_gain

Gets red gain value

blue_gain

Gets blue gain value

backlight_compensation Gets backlight compensation mode

auto_iris

Gets auto-iris mode

iris

Gets iris value

gain

Gets gain value

detail

Gets detail value

chroma

Gets chroma value

Examples

camera 3 ccu get iris

Gets the iris value for camera input 3

camera 1 ccu get red_gain

Gets the red_gain value for camera 1

Summary of Contents for AV BRIDGE MATRIX PRO





































































Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands

VADDIO AV BRIDGE MATRIX PRO, Installation And User Manual

Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands