VADDIO AV BRIDGE MATRIX PRO Installation And User Manual Download Page 55

Page: 55 / 68

AV Bridge MATRIX PRO

AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C

Page 55 of 68

Camera focus

Changes the focus of the specified camera nearer or farther than the current focus.

Synopsis

camera [1-3] focus {{near | far | stop} <1-8> | mode {auto | manual}}

Required

[1 – 3]

Specify which camera to focus.

Options

near <1 – 8>

Move the focus nearer. Optionally specify speed as an integer from

1 to 8.

far <1 – 8>

Move the focus farther. Optionally specify speed as an integer from

1 to 8.

stop

Stop the focus movement at the current point.

mode [auto | manual] Set the focus mode to automatic or manual.

Examples

camera 3 focus near

Focuses camera 3 near at the default speed.

camera 1 focus far 8

Focuses camera 1 far using a speed of 8.

camera 1 focus stop

Stops the focus movement of camera 1.

camera 2 focus mode auto

Sets camera 2 to automatic focus mode.

Camera pan

Pans the specified camera to the left or right.

Synopsis

camera [1-3] pan {left | right | stop} <1-24>

Required

[1 – 3]

Specify which camera to pan.

Options

left <1 – 24>

Move the camera left. Optionally specify speed as an integer from 1

to 24. Default speed is 12.

right <1 – 24>

Move the camera right. Optionally specify speed as an integer from

1 to 24. Default speed is 12.

stop

Stop the pan movement.

Examples

camera 2 pan left

Pans camera 2 to the left at the default speed.

camera 1 pan right 20

Pans camera 1 to the right using a speed of 20.

camera 1 pan stop

Stops the pan movement of camera 1.

Camera tilt

Move the specified camera up or down.

Synopsis

camera [1-3] tilt {up | down | stop} <1-20>

Required

[1 – 3]

Specify which camera to tilt.

Options

up <1 – 20>

Move the camera up. Optionally specify speed as an integer from 1

to 20. Default speed is 10.

down <1 – 20>

Move the camera down. Optionally specify speed as an integer from

1 to 20. Default speed is 10.

stop

Stop the tilt movement.

Examples

camera 3 tilt up

Tilts camera 3 up at the default speed

camera 1 tilt down 20

Tilts camera 1 up using a speed of 20

camera 1 tilt stop

Stops the tilt movement of camera 1

Summary of Contents for AV BRIDGE MATRIX PRO





































































Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands

VADDIO AV BRIDGE MATRIX PRO, Installation And User Manual

Search results

Summary of Contents for AV BRIDGE MATRIX PRO

Reviews:

Related manuals for AV BRIDGE MATRIX PRO

Brands by name

Popular brands