AV Bridge MATRIX PRO
AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C
Page 37 of 68
Screen Shot: Control Devices
•
Macros:
MACROS ID / Name:
Displays the name given to Macros
and the ID number assigned to any Macros.
Test Button:
Tests the Macro the button corresponds to
in the list of available Macros.
Edit Button:
Allows editing of the Macro the button
corresponds to. That Macro and code will then appear in
the Macro Editor area below the Macro list.
MACRO EDITOR:
This area is to write or edit the Macros
required for performing functions with hardware, software
or One-Touch (MicPOD) triggers.
MACRO EDITOR Name:
Type in desired macro name.
MACRO EDITOR Commands:
Use this area to enter
telnet command lines for desired functions or groups of
functions. Up to 50 lines of code available for each of
25 Macros. It is suggested to use one command per line.
MACRO EDITOR:
Test, Save and Save As buttons: Rather
self-explanatory, use these to Test the Macro, Save the Macro
or Save the Macro As another name. Macros are saved locally
to the MATRIX PRO and will persist after a power cycle.
MACRO EDITOR:
New button will clear any information in the Name
field and the Command field to start writing a new Macro.
①
②
③
④
⑤
⑥
⑦
⑧
①
②
③
④
⑤
⑥
⑦
⑧
