manualshive.com logo in svg

V-ZUG CombiSteamer V6000 Series, Operating Instructions Manual, Page: 56 / 72

Share
Download
V-ZUG CombiSteamer V6000 Series Operating Instructions Manual Download Page 56

8 Care and maintenance

See «Accessories and spare parts» for where to obtain this descaler.

«durgol swiss steamer» was developed especially for this appliance.

Standard descaling solutions are not suitable as they may contain foam-
creating additives or not be effective enough.

Using a different descaler could cause

▪

overfoaming inside the appliance

▪

insufficient descaling of the boiler

▪

damage to the appliance in the worst case.

Starting descaling

The appliance must have cooled down before descaling.

Remove accessories, cookware or other objects from the cooking space. Do not
leave the appliance unattended: during the descaling process, the descaler must
be added and the water tank must be emptied. The appliance door must be
closed during descaling.

When the message «Do you want to descale the appliance now? You must accompany
the process.» appears in the display: 
▸ Touch «Yes».

–

The following appears in the display: «The appliance is being prepared for descal-
ing.»

If an acoustic signal is emitted and «

 Residual heat too high» appears in the dis-

play, the appliance has not cooled down sufficiently and the descaling process
cannot be started.

▸

Allow the appliance to cool down.

▸ When the corresponding message appears in the display: Pour 0.5 l undiluted de-

scaler into the water tank, insert the tank and confirm with «OK».

–

The descaling process starts.

–

The following appears in the display: «Descaling appliance.»

For safety reasons, once started the descaling process cannot be cancelled.

Discarding the rinsing solution

▸ When the corresponding message appears in the display: remove the water tank,

pour the rinsing solution away and fill it with 1 l warm water.

▸ Put the water tank back.

–

The rinsing phase starts automatically.

–

The following appears in the display: «Rinsing appliance.»

▸ Repeat the procedure as often as required by the appliance.

As the water is heated up during final rinsing, the appliance door may steam up.

56

Summary of Contents for CombiSteamer V6000 Series









































































Reviews:

No comments