manualshive.com logo in svg

V-ZUG CombiSteamer V6000 Series, Operating Instructions Manual, Page: 25 / 72

Share
Download
V-ZUG CombiSteamer V6000 Series Operating Instructions Manual Download Page 25

4 Operation

▸ Set the desired operating time using the CircleSlider.

Start

04min 00s

Timer

1

▸ Press «Start».

–

The start screen appears.

–

The countdown to the time remaining appears in the display.

When the duration is up

–

an acoustic signal is emitted.

–

«Timer finished» appears in the display.

▸ Press «OK» to confirm the message.

Checking and changing

▸ Touch the   «Timer» function button.

–

The countdown to the time remaining appears in the display.

▸ Press «Stop».

–

The timer is interrupted.

▸ Shorten or extend the duration of the timer using the CircleSlider.
▸ Press «OK» to confirm the shortening or extending of the duration of the timer.

–

The change to the duration of the timer is saved.

–

The start screen appears.

–

The countdown to the time remaining appears in the display.

The next time the timer is called up, the last duration set automatically appears as
the recommended value.

Turning the timer off before time

▸ Touch the   «Timer» function button.

–

The countdown to the time remaining appears in the display.

▸ Press «Stop».

4.16 

Illumination

The cooking space illumination can be switched on and off at any time.

The cooking space illumination switches on automatically 3 minutes before the set
duration is up.

Switching the cooking space illumination on

▸ Touch the   «Illumination» function button.

–

The colour of the   function button changes to amber.

–

The cooking space illumination is switched on.

25

Summary of Contents for CombiSteamer V6000 Series









































































Reviews:

No comments