V-ZUG CombiSteamer V6000 Series Operating Instructions Manual Download Page 47 | Manualshive

Page: 47 / 72

V-ZUG CombiSteamer V6000 Series Operating Instructions Manual Download Page 47

7 User settings

Temperature unit

The temperature can be displayed in «°C» or «°F».

▪

°C:

Degrees Celsius

▪

°F:

Degrees Fahrenheit

Water hardness

The appliance is equipped with a system that automatically indicates when it is time to
descale. The system can be optimized for households with soft water (also through using
a water softening appliance) and medium water hardness by changing the user settings
to the relevant range of water hardness.
There are four settings for water hardness:

Type

Water hardness °fH Water hardness °dH Water hardness °eH

Very hard

>38°

>21°

>27°

Hard

27–38°

16–21°

19–27°

Medium

16–26°

9–15°

12–18°

Soft

1–15°

1–8°

1–11°

7.7

Assistance functions

Water compartment flap

If set to «On», the flap of the water tank compartment opens automatically when the wa-
ter tank is empty and water is required for operation.

Illumination

If set to «On», the cooking space illumination pulses when there is a new message dur-
ing operation.

Touch the

symbol to switch the illumination on or off at any time.

If the illumination is not switched off, it will go off automatically within 3 minutes to
save energy.

Preheat tone

If set to «On», a short preheat tone is emitted when it is time to put the food into the
cooking space.

7.8

Date and time

Time synchronization

The «Internet» setting is set automatically when connecting to V-ZUG-Home. The time,
date and time zone are then synchronized directly from the app.

Date

The date can be called up and changed.

Automatic summer/winter time adjustment

If this function is activated, the switch between summer and winter time occurs automat-
ically.
This requires that the correct date be entered in the user settings.

Time

The time can be called up and changed.

47

«
...
45
46
47
48
49
...
»

Summary of Contents for CombiSteamer V6000 Series









































































Reviews:

No comments