![background image](http://html1.mh-extra.com/html/v-zug/coffeecenter-v6000-45/coffeecenter-v6000-45_operating-instructions-manual_3093235029.webp)
7 User settings
7.11
Energy saving mode
When the user setting is enabled, energy consumption is reduced in compliance with
European regulations; appears on the start screen. This user setting is enabled by de-
fault.
7.12
Coffee temperature
The temperature of the water used for making drinks can be changed. The following set-
ting ranges for the temperature of the water can be selected:
▪
Low
▪
Medium (default setting)
▪
High
▪
Very high
7.13
Water hardness
The appliance is equipped with a system that automatically indicates when it is time to
descale. The system can be optimized for households with soft water (also through using
a water softening appliance) and medium water hardness by changing the user settings
to the relevant range of water hardness.
There are 4 setting ranges for the water hardness. The number of red squares that form
on the test strip indicates the water hardness and corresponds to the level to be set for
the appliance. The higher the number of red squares, the harder the water. The default
setting for water hardness is «Level 4».
Type
Water hard-
ness [°fH]
Water hardness
[°dH]
Water hardness
[°eH]
Red squares
Level
Very
hard
38 to 50
22 to 28
27 to 35
4
4
Hard
25 to 37
15 to 21
18 to 26
3
3
Medium
14 to 24
8 to 14
10 to 17
2
2
Soft
1 to 13
1 to 7
1 to 9
0–1
1
Measuring the water hardness
▸ Remove the test strips from the packaging as per the instructions.
▸ Completely immerse the test strips in a glass of water for 1 second.
▸ Remove the test strips from the glass and gently shake off any excess water.
–
After about 1 minute, 0–4 red squares form, depending on the hardness of the wa-
ter.
–
The number of red squares corresponds to the level of water hardness to be set for
the appliance.
Setting the water hardness level
▸ Touch the button.
–
The user settings menu appears in the display.
▸ Touch or repeatedly until the user setting appears in the display.
▸ Touch repeatedly until the desired level of water hardness, e.g. level 2, appears in
the display.
29