![background image](http://html1.mh-extra.com/html/v-zug/coffeecenter-v6000-45/coffeecenter-v6000-45_operating-instructions-manual_3093235030.webp)
8 Demo mode
7.14
Language
The language in the display can be changed. Different languages are available for selec-
tion.
7.15
Acoustic signal
When this user setting is enabled, an acoustic signal is emitted whenever a symbol is
touched or a part of the appliance is removed or replaced. This user setting is enabled
by default.
7.16
Cup illumination
When this user setting is enabled, cup illumination is activated whenever a coffee drink
or hot milk is delivered and whenever a rinse cycle is running. This user setting is dis-
abled by default.
7.17
Background
The background for the start screen can be defined using this user setting. Different
backgrounds are available for selection.
7.18
Factory settings
One or more user profiles can be reset to the factory settings with this user setting.
7.19
Statistics
The following statistical data can be retrieved with this user setting:
▪
Total coffee drinks without milk
▪
Total drinks with milk
▪
Total litres water delivered
▪
Total descales performed
▪
Total water filters used
8
Demo mode
The demo mode enables specialist retailers to put the appliance into showroom mode
for demonstration purposes. It allows functions to be demonstrated without the water
tank being filled with water.
This setting is not recommended for private use, as no drinks can be prepared.
8.1
Activating
The demo mode can be started without any water in the water tank.
▸ Set the main switch to
0
.
–
The appliance is disconnected from the power supply.
The following steps must be performed within 10 seconds. Otherwise the demo
mode is not activated.
▸ Hold the ON/OFF button depressed and at the same time set the main switch to
I
.
–
After 5 seconds, a double acoustic signal is emitted.
▸ Release the ON/OFF button again.
▸ Select language.
30