2
Using for the first time
Coffee has been used to factory test the appliance, and so it is possible that there
may be traces of coffee in the mill. The appliance is, however, guaranteed to be
completely new.
Before operating the appliance for the first time, the following steps should be taken:
2.1
Selecting language
▸ If you have not already done so, connect the appli-
ance to the mains electricity supply: Insert the mains
plug into a suitable mains socket.
▸ Pull the appliance out.
▸ Set the main switch to
I
.
▸ Set the language.
▸ To set the language at a later time, go to Language in
the user settings (see page 27).
▸ Slide the appliance in.
2.2
Filling the water circuit with water
Danger of burns!
Do not leave the appliance unattended while hot water is being delivered!
▸ When the corresponding message appears in the dis-
play: fill the water tank with fresh water and place
back in the appliance (see page 14).
▸ When the corresponding message appears in the dis-
play: Slide the hot-water/steam spout
1
on the con-
nection nozzle
2
and place a 0.5-litre receptacle un-
der the water spout.
–
In the display appears: «Water circuit empty. Press
to fill»
▸ Touch
.
–
Hot water comes out of the hot-water/steam
spout
1
.
When hot water stops coming out of the hot-water/
steam spout
1
:
–
the main menu appears in the display.
–
the appliance is ready for use.
1
2
2.3
Cleaning the accessory parts
The following accessory parts can come into contact with water or milk and must there-
fore be rinsed with hot water before using for the first time:
▸ individual parts of the milk frother (see page 36)
▸ individuals parts of the hot-water/steam spout (see page 38).
2.4
Setting the water hardness
▸ Set the water hardness to ensure optimized descaling (see page 29).
10
