V-ZUG CoffeeCenter V6000 45, Operating Instructions Manual

Page: 45 / 52

10 Trouble-shooting
Displayed message Possible cause Solution
Turn adjusting knob to a
milk position ▪ The adjusting knob of
the milk frother was in
the
position
when the milk frother
was inserted.
▸ To make coffee with milk, turn
the adjusting knob of the milk
frother to the , or pos-
ition (see page 23).
Descaling necessary.
Press
to start (~45
mins.)
▪ The appliance must
be descaled. ▸ Touch to start descaling
immediately (see page 38).
Or:
▸ Touch to start descaling
later (see page 38).
Replace water filter. Press
to start
▪ The water filter is ex-
hausted. ▸ Touch to replace the water
filter immediately (see page
28).
Or:
▸ Touch to replace the water
filter later (see page 28).
General alarm: See in-
structions ▪ The inside of the ap-
pliance is very dirty. ▸ Clean the inside of the appli-
ance (see page 34).
▪ The grounds con-
tainer, drip tray, water
tank and/or infuser
assembly have not
been inserted cor-
rectly.
▸ Set the main switch to 0 .
– The appliance is discon-
nected from the power
supply.
▸ Insert the appliance parts cor-
rectly (it is not necessary to
clean them):
▪ grounds container and drip
tray (see page 33)
▪ Water tank (see page 34)
▪ Infuser assembly (see page
36)
▸ Switch the appliance on (see
page 14).
▪ If message appears
again: ▸ Call Customer Services.
▪ The appliance is
scaled up.
▪ The water filter is ex-
hausted.
▸ Descale the appliance (see
page 38).
▸ Replace (see page 18) or re-
move (see page 19) the wa-
ter filter.
45