![background image](http://html1.mh-extra.com/html/v-zug/coffeecenter-v6000-45/coffeecenter-v6000-45_operating-instructions-manual_3093235044.webp)
10 Trouble-shooting
Displayed message
Possible cause
Solution
Insert infuser assembly
▪
The infuser assembly
has not been inserted
correctly.
Water circuit empty. Press
to fill
▪
The water circuit is
empty.
▸ Touch
.
–
Hot water comes out of the
hot-water/steam spout.
▸ Deliver hot water until the flow
becomes regular.
▪
If the message ap-
pears again:
▸ Push the water tank back in
until it clicks into place.
Press
to start cleaning
or turn the adjusting knob
to a milk position
▪
The adjusting knob of
the milk frother has
been turned to the
position.
▸ To start the cleaning process,
touch
.
–
The cleaning of the milk
frother starts.
▸ To make coffee with milk, turn
the adjusting knob of the milk
frother to the , or pos-
ition (see page 23).
Turn adjusting knob to
to start cleaning
▪
Milk has been de-
livered; the milk tube
must be cleaned.
▸ Turn the adjusting knob to
.
–
The cleaning of the milk
frother starts.
44