10 Trouble-shooting
Displayed message
Possible cause
Solution
Ground too fine. Set mill 1
level higher while in oper-
ation
▪
The grinding is set
too fine.
▪
The coffee is de-
livered a drop at a
time, too slowly or not
at all.
▸ During the preparation of the
coffee, turn the adjusting
knob for the coffee mill clock-
wise one position at a time
(towards «7») until the coffee
is delivered satisfactorily (see
page 15).
▪
If the message ap-
pears again:
▸ Push the water tank back in
until it clicks into place.
▪
For water filters: An
air bubble has
entered inside the cir-
cuit and is obstruct-
ing the delivery of the
drinks.
▸ Slide the hot-water/steam
spout on the connection
nozzle.
▸ Deliver hot water until the flow
becomes regular (see page
24).
Select a milder taste or
reduce pre-ground coffee
quantity
▪
The quantity of coffee
beans in the beans
container is only suffi-
cient for a milder
taste.
▸ Select a milder taste (see
Or:
▸ Fill the beans container (see
▪
Too much ground
coffee has been
placed in the funnel.
▸ Open the lid of the beans
container.
▸ Reduce the quantity of
ground coffee in the funnel
(see page 22).
Insert water spout
▪
The hot-water/steam
spout has not been
pushed on the con-
nection nozzle cor-
rectly.
▸ Slide the hot-water/steam
spout on the connection
nozzle (see page 24).
Insert milk frother
▪
The milk frother has
not been inserted cor-
rectly.
▸ Slide the milk frother on the
connection nozzle and push
down as far as it will go (see
page 16).
43
