UWE P90, Operating And Assembly Instructions Manual

Page: 49 / 77

49
2. Carefully pull out the mounting plate for the middle high
pressure lamp module (27/1) half way
3. Remove the middle mounting plate
Pull the supply lines leading to the base frame to the rear
• Demount the cable leadthrough cover (28/1) on the base
frame for the stand from the rear side
• From the inside of the base frame, pull all leads through
the opening to the rear
• Disconnect the earth lead (28/3) from the stand
• Disconnect the couplings for the BREEZE, and leakage
hoses
Coding lead for remote connection
Removal of the shoulder tanner and fan assembly
The multifunction unit is delivered in demounted condition
• If necessary, remove the plastic panels (30/1 ... 30/4) of
the multifunction unit and fan assembly by undoing the
connecting screws in the plastic panels
• Disconnect the loudspeaker leads on the control unit’s
mounting plate and expose up to the multifunction unit and
fan assembly (The lines are mounted on the multifunction
unit)
Plastic paneling components (30/1 ... 30/4) of the
multifunction unit demounted