UWE P90, Operating And Assembly Instructions Manual

Page: 33 / 77

33
9.1 Maintenance intervals
Be sure that technical equipment is inspected and serviced regularly. During repair or start-up,
additional measures must be taken to prevent unauthorized access to the safety area.
Only authorized persons may work on the equipment, contact your authorized dealer or
PC Tan Customer Service for further details. Do not do anything which could impair the safety
of the equipment. Order original spare parts only from your specialized dealer or PC Tan. No
liability can be assumed if parts other than the original spare parts are installed.
Component Interval Activity
As necessary 100h 500h 750h 1000h 3000h 10000h
Breeze X Replace
Facial Tanners X Replace
Shoulder Tanners X Replace
UV Lamps Base X Replace
HP Lamps Canopy X Replace
Springs X Inspect and replace as necessary
Springs X Replace
Kinematik (lift system) bolts and fasteners X Inspect and replace as necessary
Kinematik (lift system) bolts and fasteners X Replace
Chassis and associated fasteners X Inspect and replace as necessary
Chassis and associated fasteners X Replace
Wiring associated plugs / connections X Inspect and replace as necessary
Acryl UV Panels X Inspect and replace as necessary
Acryl UV Panels X Replace
High pressure filter glass X Inspect and replace as necessary
High pressure lamp holder X Inspect and replace as necessary
High pressure lamp holder X Replace
Low pressure lamp holder X Inspect and replace as necessary
Low pressure lamp holder X Replace
Fans X Inspect and replace as necessary
Fans X Replace
Dust Filters X Inspect and replace as necessary
Dust Filters X Replace
.