ColonyDoc-It Imaging Station
27
Step 2: Finish
The software will automatically
move to the second tab
Step 2 of
2: Finish
after
Count
is selected
in
Step 1 of 2: Select classes
.
To add or subtract zones, change
the slider buttons for
shape
(circular to irregular) and
size
(1
pixel to 200 pixels) until all the
zones of interest are highlighted.
This window is a second means to
save settings into templates. Go
to the
Templates
section of this
manual for instructions on creating
templates.
Click
Finish
to exit the manual
count mode and view the results
table.
The software will redirect to the
initial screen and display the total
number of zones identified.
To view the analysis data for the
zones click onto
Show Results
Window
from the Main Tools
section of the Colony Count
module.
A window appears that
provides information relating to the
classes, zones (listed as colonies),
statistics, and distribution of the
zones. In the report, users may
view the area and perimeter of the
zone.
To learn more about reporting
capabilities, go to the
Reporting
Functions
section of this manual.
