UTStarcom UTS 702 U, User Manual

Page: 15 / 105

1-2 Before Using Your Phone 702-U User Manual
1.2 Phone Spec
Transmission power Approximately 10mW on average
Battery DC 3.6V Li-ion battery, at least 480mAh
Size 119×44 (excluding antenna) ×22mm (L×W×H)
Weight Approximately 83g (including battery pack)
Charger Input: AC 100-240V±10%, 50-60Hz
Output: DC 5.2V, 210mA
Weight: 50g
Charging time Approximately 2.5 hours
Continuous standby time
48~200 hours
Table 1-1: Phone Specification
( ( ( (
Note: The length of standby time the battery can supply power is determined by the
telephone usage. The following actions or situations can consume more power
and reduce the standby time.
Migration to areas where signal strength is weak.
Moving through the service area.
Talking on the phone for long periods of time.
Ringing volume is set to the maximum.
Earpiece volume is set to the maximum.
Leaving the phone in hot or cold places such as a car will reduce the
capacity and life of the battery. A phone with a hot or cold battery
may temporarily not work even when the battery is fully charged.
Repeated changing of phone parameters. (i.e. Adding or deleting
entries to/from the phonebook feature)